IJSBA is reporting on the remaining applicants for the Aftermarket Hull Homologation Program. The IJSBA Aftermarket Hull Homologation Program was designed to streamline and normalize the use of aftermarket hulls (and top deck configurations) in IJSBA competition. IJSBA’s history of aftermarket hull use has varied over the years. IJSBA banned the use of all aftermarket hulls in 1997 and were reintroduced in the mid 2000s to ensure that the Ski category of racing would be able to continue in the event that new OEM Ski watercraft were no longer produced. Fortunately, newer and better functioning Ski watercraft continued to be produced by the OEMs and we now enjoy two Ski competition platforms based off of stock hulls and aftermarket hulls.

IJSBA competitors have a right to know exactly what equipment they may face when they participate in a race. This allows for fair evaluation of the competition and intelligent assumption of the risk which is required for competitors to know and accept the extent of danger they face if they enter a race. Additionally, sanctioned racing requires even administration of the rules and expectations for races as they compete from event to event and location to location. Hull legality interpretation needs to be consistent and hull characteristics be known and consistent. For the purposes of safety, fairness, and predictability, IJSBA informed competitors in 2019 that this program was coming. Progress was delayed due to COVID-19 and the recovery. IJSBA announced that 2024 would be the implementation date. Seven entities applied for the hull homologation program. Four of those entities (Bullett, Kommander, VK Composites, Fast Powersports) have completed their preliminary application and are eligible for competition. This report focuses on the remaining three.

  1. Four Star. Four Star aftermarket hulls applied for Aftermarket Hull Homologation. Their intention was to be finalized for the Kings Cup/Round three of the WGP-1 World Series. As such, their processing was not considered a priority. The 4 Star line is expected to be approved as IJSBA is only waiting on additional photographs, final paperwork, and an inspection plan.
  1. Crazy House. Crazy House aftermarket hulls applied for Aftermarket Hull Homologation. Their intention was to be finalized for the Kings Cup/Round three of the WGP-1 World Series. As such, their processing was not considered a priority. The Crazy House line is expected to be approved as IJSBA is only waiting on additional photographs, final paperwork, and an inspection plan.
  1. Pro Force. Pro Force initially applied for Aftermarket Hull Homologation. Pro Watercraft, the producer of the Pro Force, has extensive background knowledge of IJSBA’s rules and limitations. In years past, a Pro Force was introduced that purported to have a middle second bond flange that was directly prohibited by IJSBA Rules (SKGP.2.2). In 2023, IJSBA published rules (Aftermarket Hull Homologation Guide) allowing this particular feature, as inspected, to be considered a hull length sponson and as part of a limiting set of allowances applicable to all aftermarket hulls. When Pro Watercraft submitted the application for the Pro Force, the product description did not depict a complete watercraft that would be submitted for inspection. Instead, the submission was a collage of pictures, none showing a completed unit. This submission can be viewed here: ProForce 3.0 Detailed Spec

In addition to the lack of a complete unit, the final page of the submission showed a transom appendage called a “Vertical Fin Protector.” It was not clear from the submission if the appendage was part of a completed unit or an accessory that was available with the unit. To get a complete set of pictures of a completed unit, IJSBA scheduled a person to take every conceivable picture, from every possible angle, of what was to be offered as a completed Pro Force unit that would be submitted for technical inspection. Chris Hagest, the representative of Pro Watercraft, wrote IJSBA, wrote to IJSBA on September 5, that the rear appendage would be removed if it was necessary to move forward. In response IJSBA issued approval for the Pro Force product as is explained here and documented. The photographs of the completed unit were received on Friday, September 13, at approximately 9:00 PM. On Wednesday, September 18, at approximately noon, Pro Watercraft was sent an email approving the Pro Force under the conditions that the rear appendage was removed as previously promised and that the pictures reflected the finished unit with no further sponsons or appendages to be added after the fact. Mr. Hagest communicated that he would not agree to either term. Copies of these conversations can be viewed here:: IJSBA PF CRSP Set 1 and IJSBA PF CRSP Set 2. The copies have been furnished for peer review to allow the public to comment and advise on any suggestions on how these subjects could have been communicated more clearly since there seems to be some confusion in the public that not only was his product not approved but that there was no reason given for the product not moving forward to final approval. Neither of these statements are true. IJSBA has no record of this appendage being submitted for approval previously. IJSBA believes it to have only come about in the last year to 18 months.

An aftermarket hull, in Ski Class is limited to 97 inches in length per IJSBA Rules (SKGP.1 Book Mark). These rules have been in place for more than seven years. Ironically, one of the principal individuals who proposed the rule changing maximum hull length from the previous allowance of 120 inches to a limit of 97 inches, was, in fact, Chris Hagest. IJSBA rules allow for a section of the hull to be extended so long as it is a trim tab which extends the planning surface of the hull (SKGP.2.7, Glossary). As these offending appendages were described as “Vertical Fin Protector” and above additional appendages that, to be class legal, would have themselves be counted as the trim tabs, the upper appendages had no basis in the rule book for extending the length of the hull. Indeed, in communication with Mr. Hagest, he described it as “stepped up” and having additional function. Because of these refusals, specifically the retraction of agreement to remove the rear appendage, there was no way forward. The experience, in this particular case, is of a moving target- no matter what is submitted, something different is submitted later. The whole point of this program is for a final submission to be made and the specifications of that submission be public data so competitors and technical inspectors know exactly the parameters that have been approved. The opportunity remained open for Pro Force to be approved. IJSBA has declined other aftermarket hull configurations that are longer than 97 inches. This is not unique to the Pro Force.

Hull Amnesty. For the last two weeks, IJSBA has been in contact with purchasers of the Pro Force products who were expecting the manufacturer to follow through with the application process. Purchasers, who in good faith, have purchased this product and have used it in competition should not be penalized. IJSBA assured these competitors that we would offer an amnesty program were they to submit these previously used units for inspection as compliant with the offer for approval made to Pro Watercraft. This bulletin is the official confirmation of that amnesty which will require each unit to be verified, inspected, and made compliant with the conditions that would have given the approval for the actual homologation process. Persons under this amnesty would have those units, and only those units, eligible for sanctioned competition until 12/31/24.

Questions have been received about amnesty for other noncompliant products. IJSBA would like to distinguish that this temporary amnesty program is for units that would otherwise be compliant if the producer had followed the rules and finalized an application. Units that are not compliant under the rules cannot be excused for a temporary period. IJSBA did post notice that, as of September 4, 2024, competitors needed to be prepared for strict compliance with hull configurations.

If you have questions or comments about this notice, please email info@ijsba.com.